We’re hiringSee 5 job openings
Menu

01–07

Our services in seven categories, and more.

CTU Precast manufactures precast concrete for buildings, parking structures, bridges, perimeter walls, total precast structures, marine work and underground utilities.

Gantry cranes straddling stored precast bridge girders at the CTU Precast Marysville yard

01

Building

Wall panels, frame and floors for the whole building envelope.

  • Wall panels: structural, architectural and insulated
  • Structural beams and columns of different sizes and shapes
  • Floor and roof systems: double tees, quad tees and planks
  • Stairs
View building
Insulated precast wall panel facade and glazed entry at the Moana Springs Community Aquatics and Fitness Center

02

Parking

Precast products — columns, beams, roof and floor double tees, spandrels, stairs and more.

  • Columns
  • Inverted-tee and L-beams
  • Double tees
  • Spandrels
  • Shear walls
  • Stairs
View parking
Aerial view of the completed precast frame and decks of the Pinyon parking structure with the tower crane still standing

03

Bridge

CalTrans-approved girders, voided slabs, box girders, abutments, pier caps, wing walls, deck panels and box culverts.

  • Prestressed girders
  • Voided slabs
  • Box girders
  • Deck panels
  • Abutments
  • Pier caps
  • Wing walls
  • Box culverts
View bridge
Mobile crane lowering a precast bridge girder onto the abutment at the James Bypass crossing

04

Fence / Sound Wall

Perimeter, screen and security walls with different finishes.

  • Fence panels and posts
  • Screen walls
  • Architectural finishes
View fence
A finished precast fence wall with form-liner stone texture and a tan cap running around the PG&E Rocklin site

05

Total Precast

The whole structure from one plant — walls, frame, floors, roof and more.

  • Structural wall panels
  • Columns and beams
  • Double tees and plank
  • Stairs and landings
  • Architectural finish
View total precast
Aerial view of the Placer County Mental Health facility with every interior and exterior wall set in precast

06

Marina

Shoreline and port units, placed from barge or from the bank.

  • Shoreline and habitat units
  • Heavy marine sections
  • Custom marine casting
View marina
Crawler crane lifting a large precast marine unit from a barge in San Diego harbor

07

Underground

Box culverts, utility vaults, manholes and lids.

  • Box culverts
  • Utility vaults
  • Manholes
  • Lids and covers
  • Retaining walls
View underground

08In detail

What each category is built from.

01

Building

View
  • Wall panels

    Load-bearing, shear wall and cladding panels, up to 12 feet wide, prestressed or conventionally reinforced.

  • Insulated wall panels

    Sandwich panels with a continuous insulation layer between two concrete wythes — one element, structure and envelope together.

  • Architectural precast

    Form-liner textures such as thin brick, exposed aggregate, veneers and various other textures, sampled and approved before production.

  • Beams and columns

    The frame that carries the floors, cast with the corbels, plates and connections already in place.

  • Double tees and plank

    Long-span floor and roof decks, with spans a cast-in-place slab cannot reach without intermediate support.

  • Stairs

    Precast flights and landings, set as the frame goes up so the building has usable access from day one.

02

Parking

View
  • Columns

    Multi-level columns cast with corbels and connection hardware already in place.

  • Inverted-tee and L-beams

    The beam lines that carry the tees, sized to the bay rather than to a standard depth.

  • Double tees

    The deck itself — long-span prestressed tees that clear the full parking bay with no intermediate support.

  • Spandrels

    The perimeter beam and the building's face in one piece: structure, vehicle barrier and architecture together.

  • Shear walls

    Precast lateral system: panels are connected together to act as shear walls rather than poured in place.

  • Stairs

    Precast flights and landings set with the frame, so every level has code access as it is completed.

03

Bridge

View
  • Prestressed girders

    I-girders or wide flange prestressed units for long spans.

  • Voided slabs / Box girders

    Shallow-depth spans for short crossings where headroom under the deck is the constraint.

  • Deck panels

    Precast deck sections set across the girder lines, taking the formwork out of the deck pour.

  • Box culverts

    Precast box sections for the crossings a bridge is not the answer to.

04

Fence

View
  • Fence panels and posts

    Panels set between precast posts on a prepared footing, with various finishes.

  • Screen walls

    Screening for substation yards, plant equipment and service areas.

  • Architectural finishes

    Form-liner texture and cap profiles, cast in rather than applied.

05

Total Precast

View
  • Structural wall panels

    Load-bearing and shear walls that enclose the building and support it, accounting for both gravity and lateral loads.

  • Columns and beams

    Load-bearing gravity members, designed and coordinated within the total precast system.

  • Double tees and plank

    Floor and roof decks spanning between the walls and beam lines.

  • Stairs and landings

    Cast and set with the structure, so access exists as the building rises.

  • Architectural finish

    Where the structure is also the finished face — form liners, veneer, texture and reveals cast into load-bearing panels and crash walls.

06

Marina

View
  • Shoreline and habitat units

    ECOncrete units placed along riprap and in the intertidal zone at the Port of Redwood City.

  • Heavy marine sections

    ECOncrete units lifted from barge-mounted plant at the Port of San Diego.

  • Custom marine casting

    Units cast to the project's own drawings — marine work rarely has a standard product line.

07

Underground

View
  • Box culverts

    Precast box sections for drainage and crossings, cast to the agency's standard detail.

  • Utility vaults

    Electrical, communications and water vaults with knockouts and hardware cast in place.

  • Manholes

    Barrels, cones, risers and grade rings, sized to the invert depth the project calls for.

  • Lids and covers

    Precast lids with aluminum access hatches, vents and frames set in the form.

  • Retaining walls

    Precast retaining and site walls where the grade has to be held rather than buried.

Next step

Send the drawings. We’ll tell you whether precast is the right call.

PCI Certified Plant #216422 · ISO 9001:2015 · CalTrans Sections 50 & 51 · CA 1029491 · NV 0078191 · OR 213231